High Gloss Coating
Free File Review
Custom Graphic Design
Door Hangers are flyers that have a 1.25″ diameter circle cut out with an accompanying slit that allows them to hang on a doorknob. They are very common in marketing campaigns, as they nearly guarantee customer interaction.
Here at MB3 Printing in Philadelphia, we offer affordable door hanger printing for your business needs. You can also choose aqueous or UV coating. Coming up with a design doesn’t need to be difficult or expensive. We offer custom designed cards for $35 with upto 3 revisions.
Once the artwork is uploaded and approved your door hangers will be ready for pick up in 3 to 6 business days!
Aqueous Coating a semi gloss finish with water-based coating applied over the entire printed piece. It reduces the gloss of the printing and it can be written on with a ballpoint pen.
UV is short for Ultra Violet Light-Cured Coating. This is a thick high gloss coating applied over the front of the printed piece. It is not recommended for printed material you need to write on after being produced.
Our standard sizes, listed below, are the most popular in the printing industry:
Choose from our available sizes
LET US DO IT FOR YOU
We require that you extend any images that run up to the trim line a minimum of 1/8″ (0.125″) past the trim line to create “bleed”. Depending on what program you use to create your file, this may or may not change the total image area of your file.
Safe Area is the 1 1/4″ (1.25″) area inside the trim line. Do not put critical information or images within the Safe Area. This is to prevent minor cutting variations from leaving unintended results at the trim edge. If you choose to make less than this minimum clearance, we will NOT be responsible for items that are cut off in this area.
Minimum of 150 dpi (dot per inch) resolution at 100% in CMYK color mode.
.TIF, .TIFF, .EPS, .AI, .PSD, .BMP, .GIF, .JPG, .PNG, .PDF. with a maximum upload size of 50MB.